DESCRIPTION AND FIELDS OF APPLICATION
Detergent based on neutral tensioactives and absorbent charges with degreasing action indicated for cleaning a variety of surfaces: metal before painting (galvanized sheet metal); stone and masonry also as a preliminary intervention to the action of other specific cleaners. It is also suitable for cleaning and degreasing ceramic tiles, marble, and is particularly suitable for cleaning fine polished finishes such as lime stucco.
MAIN FEATURES
Its composition allows easy removal of dirt that remains embedded in the cleaner and removed during rinsing. A non-flammable product, it can also be easily used indoors. Used to clean polished surfaces (marble, spatulas, marbles), it does not alter their natural shine. Its viscosity allows application even vertically, and when used on absorbent surfaces it reduces penetration.
APPLICATION DATA
The product is supplied ready to use. Application can be done by brush, brush, sponge and for very large areas also by spray.
Spread the product evenly over the surface to be cleaned and allow it to act for a few minutes, preventing it from drying. For this reason, the width of the areas to be treated should be adjusted according to environmental conditions and the absorption of the substrate; if drying should occur, moisten with water and repeat the treatment. Move the applied layer by brush, brush (non-metallic), or sponge to incorporate the removed dirt.
When the cleaning action is complete remove the cleaner, if possible employing pressure water, otherwise employing a sponge kept clean by rinsing. If necessary repeat the treatment. Operate at temperatures between 10-30°C. Under special environmental conditions operating on absorbent substrates, it may be appropriate to wet the surface before applying the material. Clean equipment with water immediately after use.
YIELD
The yield varies depending on the absorption, roughness and degree of soiling of the substrate to be cleaned. On average 7-12 m2/L.
TECHNICAL DATA
Density 1,03 kg/LT 7.5
pH value >5°C
Minimum storage temperature Stability in original packaging 6 months
